11 avril 2015
Pendant l’arrêt du réacteur n° 2 pour rechargement, une fuite a été découverte lors d’une inspection planifiée. Cette fuite se situait au niveau d’une soudure sur un joint d’étanchéité de 3/4 de pouces sur un évent de la pompe de recirculation. Ce circuit est isolable de celui de la cuve du réacteur par des vannes.
Type : BWR Mark II - Puissance : 3 952 MWTh - Première divergence : 05/1984
Available in english only.
Event Number : 50976
Facility : SUSQUEHANNA - 1 State : PA -
Unit : [2] - RX Type : [2] GE-4
Event Date : 04/11/2015 - Event Time : 09:58
Emergency Class : NON EMERGENCY 10 CFR Section : 50.72(b)(3)(ii)(A) - DEGRADED CONDITION
Initial PWR : 0 % - Current PWR : 0 % -
Event Text
DRYWELL LEAKAGE POINT IDENTIFIED
"On 4/11/15, Unit 2 drywell entry was performed during a planned Unit 2 refueling inspection outage. At 0958 EDT, the licensee identified leakage from a weld on the 3/4 inch seal vent piping connected to the 2A reactor recirculation pump seal area. The location is within the reactor recirculation loop isolation valves, therefore it is isolable from the reactor vessel. The piping is ASME Class 2 and is a reactor coolant pressure boundary. The reactor was in mode 3 at the time of discovery.
"This event is being reported as a degraded condition pursuant to 10CFR50.72(b)(3)(ii)(A)."
https://www.nrc.gov/reading-rm/doc-collections/event-status/event/2015/20150413en.html